• Installation
• First start
• Running as a service
• Updating
  • Manual update
• Configuring devices
• Running without superuser (Linux only)
• Limitations

Download the archive with the binary file for your operating system from the latest stable release page. The full list of supported platforms as well as links to beta and edge (unstable) releases can be found in our “Platforms” page.

To install AdGuard Home as a service, unpack the archive, enter the AdGuardHome directory, and run:

./AdGuardHome -s install

• Users of Fedora Linux and its derivatives: install AdGuard Home into the /usr/local/bin directory. Otherwise, it may cause issues with SELinux and permissions. See issue 765 and issue 3281.

• Users of macOS 10.15 Catalina and newer should place the AdGuard Home working directory inside the /Applications directory.

We also provide an official AdGuard Home docker image and an official Snap Store package.

Some other unofficial options include:

• (Maintained by @frenck) Home Assistant add-on.

• (Maintained by @kongfl888) OpenWrt LUCI app.

• (Maintained by @graysky2) Arch Linux, Arch Linux ARM, and other Arch-based OSs, may build via the adguardhome package in the AUR.

• (Maintained by @gramakri) Cloudron app.

First of all, check your firewall settings. To install and use AdGuard Home, the following ports and protocols must be available:

• 3000/TCP for the initial installation;
• 80/TCP for the web interface;
• 53/UDP for the DNS server.

You may need to open additional ports for protocols other than plain DNS, for example DNS-over-HTTPS.

DNS servers bind to port 53, which requires superuser privileges most of the time, see below. Therefore, on unix systems you need to run it with sudo or doas in terminal:

sudo ./AdGuardHome

On Windows, run cmd.exe or PowerShell with admin privileges and run AdGuardHome.exe from there.

When you run AdGuard Home for the first time, it starts listening to 0.0.0.0:3000 and prompts you to open it in your browser:

AdGuard Home is available on the following addresses:
Go to http://127.0.0.1:3000
Go to http://X.X.X.X:3000

There you will go through the initial configuration wizard.

The next step would be to register AdGuard Home as a system service (aka daemon). To install AdGuard Home as a service, run:

sudo ./AdGuardHome -s install

On Windows, run cmd.exe with admin privileges and run AdGuardHome.exe -s install to register a windows service.

Here are the other commands you might need to control the service:

• AdGuardHome -s uninstall: Uninstall the AdGuard Home service.
• AdGuardHome -s start: Start the service.
• AdGuardHome -s stop: Stop the service.
• AdGuardHome -s restart: Restart the service.
• AdGuardHome -s status: Show the current service status.

By default, the logs are written to stderr when you run AdGuard Home in a terminal. If you run it as a service, the log output depends on the platform:

• On macOS, the log is written to /var/log/AdGuardHome.*.log files.

• On other unixes, the log is written to syslog or journald.

• On Windows, the log is written to the Windows event log.

You can change this behavior in the AdGuard Home configuration file.

When a new version is released, AdGuard Home's UI shows a notification message and the “Update Now” button. Click this button, and AdGuard Home will be automatically updated to the latest version. Your current AdGuard Home executable file is saved inside the backup directory along with the current configuration file, so you can revert the changes, if necessary.

In case the button isn't shown or an automatic update has failed, you can update manually. We have a detailed guide on manual updates, but in short:

1. Download the new AdGuard Home package.

2. Unpack it to a temporary directory.

3. Replace the old AdGuard Home executable file with the new one.

4. Restart AdGuard Home.

Auto-updates for Docker, Hass.io / Home Assistant, and Snapcraft installations are disabled. Update the image instead.

To update AdGuard Home package without the need to use Web API run:

./AdGuardHome --update

This setup will automatically cover all devices connected to your home router, and you won't need to configure each of them manually.

1. Open the preferences for your router. Usually, you can access it from your browser via a URL, such as http://192.168.0.1/ or http://192.168.1.1/. You may be prompted to enter a password. If you don't remember it, you can often reset the password by pressing a button on the router itself, but be aware that if this procedure is chosen, you will probably lose the entire router configuration. If your router requires an app to set it up, please install the app on your phone or PC and use it to access the router’s settings.

2. Find the DHCP/DNS settings. Look for the DNS letters next to a field which allows two or three sets of numbers, each broken into four groups of one to three digits.

3. Enter your AdGuard Home server addresses there.

4. On some router types, a custom DNS server cannot be set up. In that case, setting up AdGuard Home as a DHCP server may help. Otherwise, you should check the router manual on how to customize DNS servers on your specific router model.

1. Open Control Panel through Start menu or Windows search.

2. Go to Network and Internet category and then to Network and Sharing Center.

3. On the left side of the screen find the “Change adapter settings” button and click it.

4. Select your active connection, right-click it and choose Properties.

5. Find “Internet Protocol Version 4 (TCP/IPv4)” (or, for IPv6, “Internet Protocol Version 6 (TCP/IPv6)”) in the list, select it and then click Properties again.

6. Choose “Use the following DNS server addresses” and enter your AdGuard Home server addresses.

1. Click the Apple icon and go to System Preferences.

2. Click Network.

3. Select the first connection in your list and click Advanced.

4. Select the DNS tab and enter your AdGuard Home server addresses.

1. From the Android Menu home screen, tap Settings.

2. Tap Wi-Fi on the menu. The screen listing all of the available networks will be shown (it is impossible to set custom DNS for mobile connection).

3. Long press the network you're connected to and tap Modify Network.

4. On some devices, you may need to check the box for Advanced to see further settings. To adjust your Android DNS settings, you will need to switch the IP settings from DHCP to Static.

5. Change set DNS 1 and DNS 2 values to your AdGuard Home server addresses.

1. From the home screen, tap Settings.

2. Choose Wi-Fi in the left menu (it is impossible to configure DNS for mobile networks).

3. Tap the name of the currently active network.

4. In the DNS field enter your AdGuard Home server addresses.

You can run AdGuard Home without superuser privileges, but you need to either grant the binary a capability (on Linux) or instruct it to use a different port (all platforms).

Using this method requires the setcap utility. You may need to install it using your Linux distribution's package manager.

To allow AdGuard Home running on Linux to listen on port 53 without superuser privileges and bind its DNS servers to a particular interface run:

sudo setcap 'CAP_NET_BIND_SERVICE=+eip CAP_NET_RAW=+eip' ./AdGuardHome

Then run ./AdGuardHome as an unprivileged user.

To configure AdGuard Home to listen on a port that does not require superuser privileges, stop AdGuard Home, open AdGuardHome.yaml in your editor, and find these lines:

dns:
  port: 53

You can change the port to anything above 1024 to avoid requiring superuser privileges. If the file does not exist, create it in the same folder, type these two lines down and save.

Some file systems don't support the mmap(2) system call that the statistics system requires. See also issue 1188.

You can resolve this issue:

• either by supplying the --work-dir DIRECTORY arguments to AdGuardHome binary. This option will tell AGH to use another directory for all its files instead of the default ./data directory.

• or by creating symbolic links pointing to another file system that supports mmap(2) (e.g. tmpfs):

  ln -s ${YOUR_AGH_PATH}/data/stats.db /tmp/stats.db
  ln -s ${YOUR_AGH_PATH}/data/sessions.db /tmp/sessions.db